FM_serie

The Statomix™ FM Series mixers were developed for 2-component coatings and other very low viscosity materials. The mixer housing is flexible and made from high-strength Polyamide with low moisture absorption and is suited for a flexible installation. The Statomix™ FM Series mixers are not suited for high pressure or for mixing of high viscosity materials. The mixer should be cleaned immediately after use with a mixture of solvent/air.

Material Housing: Polyamide (PA 12 free from plasticizer)
Elements: Polypropylene (PP)
Number of Elements 25 or 36
Retention of elements By means of a cripm on both ends of housing
End Connectors Plain ends
 Max. Operating
Temperature
According to the table below. For high pressures and temperatures above 40ºC it is
necessary to use a protective covering
Tolerances  Length +/- 1mm
fm_technisch

Part Numbers

Inside
Dia.

I.D. (mm)

Number of Elements

Outside
Dia.

O.D. (mm)

Length

L (mm)

Notch Recess
C (mm)

Max. Pressure (bar)

FM 06-09-24

6.4

24

9

188

13

14

FM 06-09-36

6.4

36

9

263

13

14