The AE Series stainless steel tube mixers are fitted with removable elements and are designed for use with 2-component reactive silicone elastomers, silicone foams and resin systems with fillers where cleaning is not possible by burning out the mixer content.
A retaining ring, positioned at the outlet end of the housing, supports the elements by means of the downstream part of the compression fitting. This type of mixer should be cleaned immediately after use and it is recommended to flush it with the main component only and then with a mixture of solvent/air. Should further cleaning still be necessary, the elements may be removed and soaked in solvent.
| Material | Housing: Stainless steel 1.4571 Elements: Stainless steel 1.4404 or 1.4435 |
| Number of Elements | 12 or 18 |
| Retention of elements | Retention ring on downstream end of housing |
| End Connectors | ERMETO fitting |
| Max. Operating Temperature |
Max. allowable operating pressure according to DIN 2413, scope of application 1, permanent elongation limit 1% at 20ºC, safety factor 1.7 |
| Tolerances | O.D. and wall: According to DIN 2391, page 1: Length +/- 1mm |
|
Part Numbers |
Inside |
Number of Elements |
Outside |
Length L (mm) |
Thread T (metric) |
Max. Pressure (bar) |
|
AE 08-12-12 |
8 |
12 |
12 |
154 |
M20 * 1.5 |
467 |
|
AE 08-12-18 |
8 |
18 |
12 |
226 |
M20 * 1.5 |
467 |
|
AE 10-14-12 |
10 |
12 |
14 |
192 |
M22 * 1.5 |
400 |
|
AE 10-14-18 |
10 |
18 |
14 |
282 |
M22 * 1.5 |
400 |
|
AE 12-16-12 |
12 |
12 |
16 |
230 |
M24 * 1.5 |
350 |
|
AE 12-16-18 |
12 |
18 |
16 |
338 |
M24 * 1.5 |
350 |
|
AE 15-20-12 |
15 |
12 |
20 |
290 |
M30 * 2 |
350 |
|
AE 15-20-18 |
15 |
18 |
20 |
425 |
M30 * 2 |
350 |
|
AE 20-25-12 |
20 |
12 |
25 |
385 |
M36 * 2 |
280 |
|
AE 20-25-18 |
20 |
18 |
25 |
556 |
M36 * 2 |
280 |
|
AE 25-30-12 |
25 |
12 |
30 |
486 |
M42 * 2 |
233 |
|
AE 25-30-18 |
25 |
18 |
30 |
714 |
M42 * 2 |
233 |
