Cyanoacrylates are one-component adhesives that cure at room temperature. Ideal curing conditions are given at a relative humidity of 40 to 70 %. Components can be fixed in just seconds thanks to the adhesives’ high reaction speed. After extremely fast curing, the components bonded cannot be adjusted anymore after joining. Therefore, cyanoacrylates are excellent for bonding small bonding areas.
|
Properties |
Application areas |
|||||
|
Further application areas
|
|||||
|
Product |
Viscosity
(mPas) |
Max. gap filling capacity (mm) |
Curing time |
Tensile strength (MPa) |
Characteristics |
|
|
2106 |
35 |
0.03 |
3-8 sec |
18 |
Especially suitable for metal and rubber to metal |
|
|
2153 |
2.000 |
0.1-0.2 |
5-10 sec |
20 |
Multi-purpose, high-viscous, bridges gaps up to 0.2mm |
|
|
2219 |
240 |
0.04 |
5-10 sec |
17 |
Special type for rubber, such as EPDM, viton, foam rubber, medium-viscous |
|
|
2229 |
300 |
0.05 |
15-25 sec |
17 |
Multi-purpose, also bridges smaller unevenness’s, delayed reaction |
|
|
2256 |
3.000 |
0.1-0.2 |
8-15 sec |
18 |
Multi-purpose, high-viscous, bridges gaps up to 0.2mm |
|
|
2348 |
1.000 |
0.1 |
20-30 sec |
13 |
Odorless, low efflorescence, not classified as hazardous |
|
|
2505 |
20 |
0.03 |
5-10 sec |
17 |
Special type for rubber, such as EPDM, viton, NBR, CR, SBR and NR, very thin |
|
|
2725 |
280 |
0.05 |
10-15 sec |
14 |
Multi-purpose, also bridges smaller unevenness’s |
|
|
2902 |
15 |
0.02 |
10-15 sec |
14 |
Very thin, excellent capillary effect |
|
|
2905 |
45 |
0.03 |
5-10 sec |
14 |
Multi-purpose, low efflorescence |
|
|
Other adhesive products in the DELO-CA serie are: |
||||||
|
DELO-Quick 2002 |
Activator, spray can 150ml. |
|||||
|
DELO-PRE 2005 |
Primer for difficult to bond plastics, bottle 100ml |
|||||
