Static mixers – explanation

The 160 serie products are used for dispensing epoxy and other two-part reactive materials with meter-mix-dispense (MMD) equipment. With conventional meter/mix manifolds the reactive materials meet within the manifold before the mixer. If the materials are allowed to gel the manifold will plug and must be disassembled. This can be a time-consuming and expensive task. The Series 160 eliminates this problem. The mixing nozzle has an oversized bell inlet. Manifolds and valves separately port the A and B materials directly into the mixer. Cleanup simply involves removing the mixer and wiping the manifold face clean. A metal jacket is recommended if the working pressure inside the mixing nozzle exceeds 150 psi (10 bar).

Specification
Element: Acetal
Housing: Polypropylene

The Series 160A mixing nozzle accepts ProTips and, thus, combines the design benefits of the disposable Series 160 static mixer with the advantage of flexibility in adhesive dispensing. These mixers have the “A” tip which allows the user to either mix and apply adhesive in a single small bead or, by attaching the ProTip, dispense material in a wide variety of widths. A metal jacket is recommended when the working pressure inside the nozzle exceeds 150 psi (10 bar).

Specification
Element: Acetal
Housing: Polypropylene

The 160AA Quick Spray series is a low-pressure air-assisted spray system for two-component coatings. This disposable static mixer is designed for use with conventional meter/mix equipment or with two-component cartridge system. The reactive coating is mixed within the disposable static mixer. At the mixer outlet, air is introduced which atomizes the liquid stream. The degree of atomization can be adjusted by regulating the airflow rate. Since the reactive coating is contained completely within the mixer, cleanup is minimal.

Intended for high flow rate meter mix applications, this series contains our largest disposable mixing elements—0.784 inches in diameter with 16 to 48 elements. The rugged Nylon housing has an oversized bell inlet. The downstream outlet is designed to accept the Pro Tip™ accessories or use the 1/2″ NPS male thread to attach extensions or other types of accessories.

Specification
Element: Acetal
Housing: Nylon

Featuring a standard Bayonet connection, the Series 190 mixer is designed for use with 50mL two-component cartridges. Typical applications include mixing epoxies, urethanes, acrylics, and silicones. The Series 190 has five diameters available with four outlet styles: Slip Luer, Full Bore, H-Tapered, and Stepped. The Slip Luer is our standard offering. The Full Bore ensures maximum flow with minimal back pressure. The H-Tapered outlet is offered where precise placement of the adhesives is required.

Our Series 260 Spiral Mixers with Integral Nut inlet connections.

Specification
Elements: Polypropylene
Housing: Polypropylene

The disposable static mixer is a product that ensures superior mixing performance and allows the operator to be closer to the work piece. The square geometry consists of a series of alternating left- and right-hand elements with intermittent flow inverters which effectively channel the fluids from the walls into the center of the mixer and from the center to the walls.

Specification
Elements: Acetal
Housing: Polypropylene

The Series 295 Turbo Mixer™ is a disposable static mixer which ensures superior mixing performance and allows the operator to be closer to the work piece. The Turbo (square) geometry consists of a series of alternating left- and right-hand elements with intermittent flow inverters. The flow inverters effectively channel the fluids from the walls into the center of the mixer and from the center to the walls.

Specification
Elements: Polypropylene
Housing: Polypropylene