STATOMIX™ KS Series steel/fiberglass mixers were developed as a low-cost alternative for mixing 2-component reactive resins. The mixing elements are made of a high-grade, solvent resistant plastic. A transverse rod supports the elements at the outlet end of the zinc-plated steel housing. Steel/fiberglass mixers are not suitable for the mixing of extremely high viscosity materials at temperatures above 80 °C.
| Material | Housing: Zinc-plated carbon steel ST 35 (stainless steel available on request) Elements: Fiberglass reinforced engineering plastic (PET) |
| Number of Elements | 24 or 36 |
| Retention of elements | Nickel brazed retention pin across the last element at downstram end of housing |
| End Connectors | Plain ends |
| Max. Operating Temperature |
80ºC |
| Tolerances | O.D. and wall: According to DIN 2391, page 1: Length +/- 1mm |
| Desing Pressure | Max. allowable operating pressure according to DIN 2413. Scope of application 1, permanent elongation limit 1% at 20ºC, safety factor 1.7 |
|
Part Numbers |
Inside |
Number of Elements |
Outside |
Length L (mm) |
Max. |
|
KS 08-10-24 |
8 |
24 |
10 |
203 |
226 |
|
KS 08-10-36 |
8 |
36 |
10 |
300 |
226 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
KS 16-20-24 |
16 |
24 |
20 |
402 |
226 |
|
KS 16-20-36 |
16 |
36 |
20 |
596 |
226 |
|
KS 20-25-24 |
20 |
24 |
25 |
501 |
226 |
|
KS 20-25-36 |
20 |
36 |
25 |
744 |
226 |
